You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card. Rubix Builders
This Rubik’s Build It, Solve It kit is for one player – it is recommended for ages 8 and up. As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. This kit right here is going to give an inside look on how the cube works and how it’s put together. Plus, you’ll receive some tips in the instruction manual on how to solve it.

You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card.


Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look at the Rubik’s Build It, Solve It, because we believe this is the one-way ticket to finally solving the cube! Rubix Building Solutions
Rubik’s Build It, Solve It. Can you recall those complex small Rubik’s cube which we’d sit there trying to work out for what seems like hours? Did any one of you guys/girls ever resolve them? Perhaps all it requires us to fix the “block” is for us to find out exactly what it’s about. When there are lots of mesmerizing toys which are just about to emerge into our planet, now, we’d love to have a good look at the Rubik’s Build It, Solve It, since we think this is the one time ticket to eventually solving the block!
This Rubik’s Build It Solve It building kit is just for one player, and is one of the new toys for 2017. Winning Moves recommend that it will suit children of ages 8 and up. We have mentioned before, that this building kit is ideal for children and adults who like to figure things out. Anyone who likes to put puzzles together will love this. The Rubik’s Build It Solve It building kit will give you an inside look on how the cube works. You will also see how it is put together, and get some tips from the instruction manual on how you can solve it. Rubix Builders
Rubik’s Build It Solve It is very similar to the traditional Rubik’s cube, but with a slight twist.  With this cube you get all of the tools and bit’s and pieces along with the instructions.  This is all you will need in order you you to build a Rubik’s Cube of your own. Once you have fitted the cube together, an instruction booklet has been included, and it is 10-pages in length. Finally, you will learn after all these years the process of solving Rubik’s Cube. You will be shown everything from identifying the parts of the cube along with solving basic puzzles. When you buy this toy, your children will be shown a slow and steady way of using the cube. They will then progress further with the toy to learn even harder challenges.
The Rubik's Build It Solve It kid comes with all the parts necessary to build your own Rubik's Cube! Easy "how to" instructions, plastic cube pieces and tiles (including some spares), center core pieces, metal screws, springs, and screwdriver - all organized in a handy storage tray. Once you've built your cube, turn to the "You Can Do The Rubik's Cube" booklet and learn how to solve it.
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command
The standard Rubik's cube has sides of about 2.2 in (5.7 cm) per square. Various other sizes have also been produced such as a 1.5 in (3.8 cm) mini cube, a 0.8 in (2 cm) key chain micro cube, and a 3.5 in (9 cm) giant cube. While the standard cube is a 3 × 3 × 3 segmentation other types have also been introduced. Some of the more interesting ones include the 2 × 2 × 2 cube, the 4 × 4 × 4 cube (called Rubik's Revenge) and the 5 × 5 × 5 cube. The shape has also been varied and puzzles in the form of a tetrahedral, a pyramid, and an octahedral are among types that were produced. The Rubik's cube also led to the development of game derivatives like the Rubik's cube puzzle and the Rub it cube eraser.
The manufacture of the first Rubik's cube prototypes was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the Rubik's cube, and putting the finished product in packaging.
Now you need to orient these pieces. Refer to the next picture. As you can see, the orange piece matches the orange centre. Look at the edges on your puzzle. You could have none matching, two matching or all matching. If you have all four edges matching the centres, your cross is solved. If you have none matching, perform a U move, then look around the cube again. You want to have at least two matching. If none of them match, do another U move. Repeat until you have either two or four edges matching their centres.

Erno Rubik, an architect and professor at the University of Budapest developed the first working prototype of the Rubik's cube in 1974. He received a Hungarian patent in 1975. Apparently, it was also independently designed by Terutoshi Ishige, an engineer from Japan, who received a Japanese patent in 1976. Professor Rubik created the cube as a teaching aid for his students to help them recognize three-dimensional spatial relationships. When he showed the working prototype to his students, it was an immediate hit.
Even in the book, during the first step, you’re told that you will need to practice and trial by error. Personally, we feel that this cube will be more fun for children and adults that enjoy puzzles and don’t mind the complications behind a Rubik’s Cube. You must have patience when it comes to building and practicing. However, once you are finally able to solve it, you’re going to be pretty proud of yourself and the people around you are going to be impressed because it really takes a lot to solve one of these cubes. 

If you're still reading, congratulations on not being put off by the time requirements! The first thing you are going to need to know about solving the cube is how the turns you make can be represented by letters. Later on in this guide, you're going to need a few algorithms. These are combinations of moves that rotate pieces or just move them around to get them where you want them. These algorithms are written using this notation, so you can always come back to this section if you've forgotten by the time we need them. Rubiks Build It Solve It Instructions
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
An important thing to note is that this task is not a light one. It may require several hours of attempts. If you'd rather just solve the cube in your hand and forget about it rather than being able to solve any cube you're given, there are plenty of solvers available on the web. However, the satisfaction of holding a completed Rubik's Cube in your hand and thinking “I did that, and I can do it again” is greater than most, mainly due to the fact that the puzzle has been present in all our lives at some point. By the mid 1980's, an estimated fifth of the world's population had attempted to solve the cube. If you want to stand out and say that you can defeat the puzzle, time and determination is a large factor. Rubix Build
×