If you were around in the 1980’s and did not live under a rock, you had a Rubik’s cube.  It was the 3D combination puzzle that had children and adults mesmerized trying to solve the impossible puzzle.  We would spend hours twisting and turning the cube to figure the solution. The cube was invented by an Hungarian professor of architecture, Erno Rubik, in 1974.  Although it took Erno over one month to solve his very own puzzle, it  became a fad and everyone had one. Consequently, it became the world’s best selling toy ever at that time. Rubiks Build It Solve It Instructions
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'.
From these early riddles and word problems, toy puzzles were naturally developed. In 1857, the Irish mathematician Sir William Hamilton invented the Icosian puzzle. Sometime around 1870, the famous 15 Puzzle was introduced, reportedly by Sam Lloyd. This puzzle involved numerical tiles that had to be placed in order and became extremely popular in the early twentieth century. In 1883, French mathematician Edouard Lucas created the Tower of Hanoi puzzle. This puzzle was made up of three pegs and a number of discs with different sizes. The goal was to place the discs on the pegs in the correct order.

You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card.
In the publication, during the very first measure, you’re advised you’ll have to practice and trial by mistake. We believe that this block will be enjoyable for kids and adults who love puzzles and don’t mind the complications supporting a Rubik’s Cube. You should have patience in regards to practicing and building. However, as soon as you’re able to resolve it, you’re likely to be quite proud of yourself and the people around you’re likely to be more amazed since it actually requires a whole lot to resolve those cubes.
Maybe all it takes to solve a Rubik's Cube is to see how one is made, and that's what kids get to do with the Rubik's Build It, Solve It kit. It comes with all the pieces, tools, and instructions kids need to build their very own Rubik's Cube. Once built, there is a 10-page instruction booklet that guides kids through solving a Rubik's Cube. From identifying the parts of a Rubik's Cube to solving basic Rubik's puzzles, kids are given a slow introduction on how to use their Rubik's Cube and progress to harder and harder challenges.
The arrangement of the cube is an excellent method to improve the cognitive, visual, spatial and motor abilities in kids. The process of arranging the cube will enable children to exploit their spatial and visual skills as they learn to adjust the tiles. It also enables children to identify colors and allow them to create perfect combinations. Check it out here.

Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform:


Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform: Rubiks Build It Solve It
Now you need to orient these pieces. Refer to the next picture. As you can see, the orange piece matches the orange centre. Look at the edges on your puzzle. You could have none matching, two matching or all matching. If you have all four edges matching the centres, your cross is solved. If you have none matching, perform a U move, then look around the cube again. You want to have at least two matching. If none of them match, do another U move. Repeat until you have either two or four edges matching their centres.
Toys"R"Us will gladly issue a refund when goods are faulty, do not match the description or purpose. To return a promotional goods or an unopened product purchased online, shipping cost incurred will not be refunded. To request a refund, please call our Customer Service team on 852-2287-1888 and have either your order confirmation or packing slip handy. In some situations, such as pre-order or on sale, the products are not available for refund and returns. To know more details, please click here
The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function.
Begin with your cube solved. Once again, you want to start off with your Rubik’s cube in its solved position. Making a fish pattern on your Rubik’s cube is simple. The end result will have swapped two edge pieces so that the remaining ones look like a fish with fins. If you hold the cube diagonally it will look like a fish swimming away from you.[7] Rubix Building Products
Rubik's cube is a toy puzzle designed by Erno Rubik during the mid-1970s. It is a cube-shaped device made up of smaller cube pieces with six faces having differing colors. The primary method of manufacture involves injection molding of the various component pieces, then subsequent assembly, labeling, and packaging. The cube was extremely popular during the 1980s, and at its peak between 1980 and 1983, 200 million cubes were sold world wide. Today sales continue to be over 500,000 cubes sold world wide each year.

Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look in this Rubik’s Build It Solve It Review, because we believe this is the one-way ticket to finally solving the cube!


The manufacture of the first Rubik's cube prototypes was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the Rubik's cube, and putting the finished product in packaging.
Puzzle makers have been creating problems for people to solve for centuries. Some of the earliest puzzles date back to the time of the ancient Greeks and Romans. The Chinese have a ring puzzle that is thought to have been developed during the second century A.D. This was first described by Italian mathematician Girolamo Carolano (Cardan) in 1550. When the printing press was invented, complete books of mathematical and mechanical problems designed specifically for recreation were circulated.

The arrangement of the cube is an excellent method to improve the cognitive, visual, spatial and motor abilities in kids. The process of arranging the cube will enable children to exploit their spatial and visual skills as they learn to adjust the tiles. It also enables children to identify colors and allow them to create perfect combinations. Check it out here.
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command
If you were around in the 1980’s and did not live under a rock, you had a Rubik’s cube.  It was the 3D combination puzzle that had children and adults mesmerized trying to solve the impossible puzzle.  We would spend hours twisting and turning the cube to figure the solution. The cube was invented by an Hungarian professor of architecture, Erno Rubik, in 1974.  Although it took Erno over one month to solve his very own puzzle, it  became a fad and everyone had one. Consequently, it became the world’s best selling toy ever at that time.

The standard Rubik's cube has sides of about 2.2 in (5.7 cm) per square. Various other sizes have also been produced such as a 1.5 in (3.8 cm) mini cube, a 0.8 in (2 cm) key chain micro cube, and a 3.5 in (9 cm) giant cube. While the standard cube is a 3 × 3 × 3 segmentation other types have also been introduced. Some of the more interesting ones include the 2 × 2 × 2 cube, the 4 × 4 × 4 cube (called Rubik's Revenge) and the 5 × 5 × 5 cube. The shape has also been varied and puzzles in the form of a tetrahedral, a pyramid, and an octahedral are among types that were produced. The Rubik's cube also led to the development of game derivatives like the Rubik's cube puzzle and the Rub it cube eraser.
The Rubik's cube (sometimes misspelled rubix cube) is a mechanical 3D puzzle, invented more than 30 years ago and still considered as the best-selling toy of all times! Yet, solving the Rubik's Cube is considered a nearly-impossible task, which requires an IQ of 160... Is that really so hard? Definitely not!! Just follow this simple step by step solving guide and you'll shortly find out that you can solve the Rubik's cube as well… Let's get to work!

1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds.

Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).


Finally, we add a camera arm.  In the original design by MindCubr, this held the EV3 color sensor over the Rubik’s cube.  In our modified design, it holds a Raspberry Pi Camera over the Rubik’s cube.  We use two LEGO Mindstorms motors to manipulate the cube: the first sits below the cradle to rotate the cube, and the second moves the shuffler arm to spin the cube on an opposite axis.
Constructing the Cube is a superb way to exercise those fine motor skills, visual and spatial comprehension and cognitive thinking from children. When the block is placed together, it is going to challenge the small ones to use their spatial and visual understanding as they know to spin the tiles. The block also helps kids learn about colours and fitting them. Rubix Building Products
Just because this kit gives you a behind-the-scenes look as to how a Rubik's Cube is made along with tips for how to solve it doesn't mean that you'll be solving it like a pro within seconds. Even the solution booklet itself says that the first step will take practice and trial by error. So this is definitely going to be more fun for kids or adults who enjoy the puzzlement of a Rubik's Cube and have the patience to build it and practice using the solving tips. But once you finally do solve it, you'll be pretty proud of yourself, and your friends and family will be impressed.
Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform:
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'. Rubix Building Products

The Rubik's "Build It Solve It" kit comes with all the parts necessary to build your own Rubik's cube. Easy "how to" instructions, plastic cube pieces and tiles (including some spares), center core pieces, metal screws, springs and screwdriver - all organized in a handy storage tray. Once you've built your cube, turn to the "you can do the Rubik's cube" booklet and learn how to solve it! By learning how to build your own Rubik's cube, you will greatly improve your understanding of how this fascinating puzzle functions, literally from the inside out.

Rubiks Build It Solve It Review


This Rubik’s Build It Solve It building kit is just for one player, and is one of the new toys for 2017. Winning Moves recommend that it will suit children of ages 8 and up. We have mentioned before, that this building kit is ideal for children and adults who like to figure things out. Anyone who likes to put puzzles together will love this. The Rubik’s Build It Solve It building kit will give you an inside look on how the cube works. You will also see how it is put together, and get some tips from the instruction manual on how you can solve it.
The robot will turn the cube to each face and the camera will take 6 pictures, one of each side of the Cube.  The Raspberry Pi will determine the cube configuration from the six pictures. The Cube configuration will be passed to the kociemba Python library to find an efficient solution. Finally, the robot will execute the moves to solve the Rubik’s Cube!
There are many approaches on how to solve the Rubik's Cube. All these methods have different levels of difficulties, for speedcubers or beginners, even for solving the cube blindfolded. People usually get stuck solving the cube after completing the first face, after that they need some help. In the following article I'm going to show you the easiest way to solve the cube using the beginner's method.
The manufacture of the first Rubik's cube prototypes was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the Rubik's cube, and putting the finished product in packaging. Rubix Building Products
recently made a significant come back. This has been a result of impressive marketing efforts by Seven Towns. In the future, this marketing effort should continue to increase sales of the Rubik's cube. In addition to the cube, other derivative puzzles have been introduced including the Rubik's snake, Rubik's triamid, and the Rubik's magic folding puzzle. It is expected that new variants will also be introduced in the near future.
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
Repeat the process. Turn back to your blue side and repeat the turns on opposite sides. Then, return once more to the red side and turn the opposite sides in opposite directions. And last, return once more to the blue side and turn the opposite sides in opposite directions. When you finish, you should have a staircase-like zig-zag across four sides of your Rubik’s cube.[4]
Puzzle makers have been creating problems for people to solve for centuries. Some of the earliest puzzles date back to the time of the ancient Greeks and Romans. The Chinese have a ring puzzle that is thought to have been developed during the second century A.D. This was first described by Italian mathematician Girolamo Carolano (Cardan) in 1550. When the printing press was invented, complete books of mathematical and mechanical problems designed specifically for recreation were circulated. Rubiks Build It Solve It
×