We add the BrickPi3 to the LEGO assembly.  We used the LEGO EV3 “wings” to support the BrickPi3 and make it level with the BricKuber body.  This is a good step to add 8XAA batteries to the power pack and attach the BrickPi3 power pack to the LEGO assembly.  For programming you can power the BrickPi3 via USB power to the Raspberry Pi, however to move the motors you will need to supply power with the Power Pack.        
Keeping white on top, turn the cube so that a different colour face is toward you. Follow the above instructions again. Repeat with the other two faces until the white cross is complete. This step is quite intuitive; you can do it for sure but it does take a little practice. Just move the white edges to their places not messing up the ones already fixed.  
Just because this kit gives you a behind-the-scenes look as to how a Rubik's Cube is made along with tips for how to solve it doesn't mean that you'll be solving it like a pro within seconds. Even the solution booklet itself says that the first step will take practice and trial by error. So this is definitely going to be more fun for kids or adults who enjoy the puzzlement of a Rubik's Cube and have the patience to build it and practice using the solving tips. But once you finally do solve it, you'll be pretty proud of yourself, and your friends and family will be impressed. Rubix Builders
When it comes to building the Rubik’s Cube, it’s not as hard as it looks. In all actuality, it will take about fifteen minutes and the instructions are easy to follow. When it comes to placing the colored tiles, make sure you pay attention to where you’re supposed to place them, because if you snap them in the wrong place, you won’t be able to remove them. Yes, you will still be able to use the Rubik’s Cube, but you won’t be able to follow along with the instruction guide on solving the puzzle.
This Rubik’s Build It Solve It building kit is just for one player, and is one of the new toys for 2017. Winning Moves recommend that it will suit children of ages 8 and up. We have mentioned before, that this building kit is ideal for children and adults who like to figure things out. Anyone who likes to put puzzles together will love this. The Rubik’s Build It Solve It building kit will give you an inside look on how the cube works. You will also see how it is put together, and get some tips from the instruction manual on how you can solve it.
The project uses the Pi to directly solve the Rubik’s cube. The BrickPi3 takes the unsolved Rubik’s cube and the Raspberry Pi takes a picture of each side of the Rubik’s cube with the Raspberry Pi Camera. The Pi creates a text map of the color squares that shows where they are located on the cube. When it has fully mapped the cube, the Pi uses the “kociemba” python library to map out the moves needed to solve the Rubik’s cube. This information is taken by the Pi and BrickPi3 to solve the Rubik’s cube using the LEGO motors. The result: a solved Rubik’s cube. Rubiks Build It Solve It
You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card. Rubix Builders

Even in the book, during the first step, you’re told that you will need to practice and trial by error. Personally, we feel that this cube will be more fun for children and adults that enjoy puzzles and don’t mind the complications behind a Rubik’s Cube. You must have patience when it comes to building and practicing. However, once you are finally able to solve it, you’re going to be pretty proud of yourself and the people around you are going to be impressed because it really takes a lot to solve one of these cubes.


Keeping white on top, turn the cube so that a different colour face is toward you. Follow the above instructions again. Repeat with the other two faces until the white cross is complete. This step is quite intuitive; you can do it for sure but it does take a little practice. Just move the white edges to their places not messing up the ones already fixed.   Rubiks Build It Solve It Review
If you were around in the 1980’s and did not live under a rock, you had a Rubik’s cube.  It was the 3D combination puzzle that had children and adults mesmerized trying to solve the impossible puzzle.  We would spend hours twisting and turning the cube to figure the solution. The cube was invented by an Hungarian professor of architecture, Erno Rubik, in 1974.  Although it took Erno over one month to solve his very own puzzle, it  became a fad and everyone had one. Consequently, it became the world’s best selling toy ever at that time.
This set comes with everything you need to build your Rubik's cube, so you can bake your cake and eat it too! With easy instructions, plastic cube pieces and tiles, center core pieces, metal screws, springs, and screwdriver, building the Rubik's cube will be a snap. For over 40 years, fans have been dying to know just how the Rubik's cube works. Now the secrets have been revealed! Allow the knowledge of the cube's inner workings to inform your strategy in solving the puzzle, along with motor skills and construction based learning. The only thing more impressive than solving a Rubik's cube is solving the one you built yourself!
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function. Rubix Building Solutions
Now you need to orient these pieces. Refer to the next picture. As you can see, the orange piece matches the orange centre. Look at the edges on your puzzle. You could have none matching, two matching or all matching. If you have all four edges matching the centres, your cross is solved. If you have none matching, perform a U move, then look around the cube again. You want to have at least two matching. If none of them match, do another U move. Repeat until you have either two or four edges matching their centres.
Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look at the Rubik’s Build It, Solve It, because we believe this is the one-way ticket to finally solving the cube!
The project uses the Pi to directly solve the Rubik’s cube. The BrickPi3 takes the unsolved Rubik’s cube and the Raspberry Pi takes a picture of each side of the Rubik’s cube with the Raspberry Pi Camera. The Pi creates a text map of the color squares that shows where they are located on the cube. When it has fully mapped the cube, the Pi uses the “kociemba” python library to map out the moves needed to solve the Rubik’s cube. This information is taken by the Pi and BrickPi3 to solve the Rubik’s cube using the LEGO motors. The result: a solved Rubik’s cube. Rubiks Build It Solve It
If you have 2 adjacent well permuted corners- turn the upper face once clockwise (U). That move will reposition the corners into a situation which only one well permuted corner will remain while the other three corners needed to be rotated counter-clockwise. Now just execute the algorithm above, and by this single execution you actually completed this step (remember to execute this algorithm from the correct angle – when the well permuted corner is on the back right. see algorithm image above). 

If you're still reading, congratulations on not being put off by the time requirements! The first thing you are going to need to know about solving the cube is how the turns you make can be represented by letters. Later on in this guide, you're going to need a few algorithms. These are combinations of moves that rotate pieces or just move them around to get them where you want them. These algorithms are written using this notation, so you can always come back to this section if you've forgotten by the time we need them. Rubiks Build It Solve It Instructions
If there are no more edges left on the top layer, then they are probably either inserted in the right place but flipped, or inserted in the wrong place. To get an edge out of somewhere it shouldn't be, just insert one of the yellow edges into that slot. This should get the edge out and on the top layer, ready for you to use the above instructions to insert correctly.
Hi, your aluminum cube is beautiful. My 6 yr old son has asked me to help him make a cube. So I went to the Home Depot today and looked around the plumbing and hardware sections. I only found some PVC pipe attachments but nothing with 6 knobs. I also found some nuts and bolts but I don't know which kind to get. Could you give me some idea of what to buy? I don't have very many tools at home but I do have a drill if I needed to drill through the PVC pipe and copper pipe cutters if I needed to use metal piping. Please help.

There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.
1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds.

3 The Rubik's cube parts are taken to an assembly line. In this phase of production, the individual cube pieces are put together. Starting with the nylon core, each ABS center cube is riveted to the core with a spring spacer. The rivet is carefully controlled with a depth stop to ensure the spring is compressed just the right amount. Each center cube has a plastic cover that is glued on to hide the rivet. One of the six center cubes is left until the last part of the assembly. The ABS edges and corner pieces are individually stacked around the core. The cube is built from the bottom up and the last piece to be assembled is the final center cube which is again riveted into the core with a spring spacer and the final cap is glued on.
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
Keeping white on top, turn the cube so that a different colour face is toward you. Follow the above instructions again. Repeat with the other two faces until the white cross is complete. This step is quite intuitive; you can do it for sure but it does take a little practice. Just move the white edges to their places not messing up the ones already fixed.  
The centre pieces on each face, as you may have noticed from playing around with the cube, can't be moved to another spot, only rotated. So we can use this to our advantage by building around the centres. The best centre to build your first cross around is the white centre, as many guides and resources on the web start with a white face, so if you need to look up some steps and examples elsewhere, your cube will look similar to the one that is being used in other demonstrations.
Begin with your cube solved. Once again, you want to start off with your Rubik’s cube in its solved position. Making a fish pattern on your Rubik’s cube is simple. The end result will have swapped two edge pieces so that the remaining ones look like a fish with fins. If you hold the cube diagonally it will look like a fish swimming away from you.[7] Rubiks Build It Solve It
×