3 The Rubik's cube parts are taken to an assembly line. In this phase of production, the individual cube pieces are put together. Starting with the nylon core, each ABS center cube is riveted to the core with a spring spacer. The rivet is carefully controlled with a depth stop to ensure the spring is compressed just the right amount. Each center cube has a plastic cover that is glued on to hide the rivet. One of the six center cubes is left until the last part of the assembly. The ABS edges and corner pieces are individually stacked around the core. The cube is built from the bottom up and the last piece to be assembled is the final center cube which is again riveted into the core with a spring spacer and the final cap is glued on.
Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look at the Rubik’s Build It, Solve It, because we believe this is the one-way ticket to finally solving the cube! Rubix Building Solutions
The Rubik’s Build It, Solve It kit is for one player.  Although ages 8 and up are recommended, I believe younger children will enjoy playing with the assembled toy.  As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. The kit gives an inside look on how the cube works and how it is put together. Plus, you will receive some tips in the instruction manual on how to solve it.
Maybe all it takes to solve a Rubik's Cube is to see how one is made, and that's what kids get to do with the Rubik's Build It, Solve It kit. It comes with all the pieces, tools, and instructions kids need to build their very own Rubik's Cube. Once built, there is a 10-page instruction booklet that guides kids through solving a Rubik's Cube. From identifying the parts of a Rubik's Cube to solving basic Rubik's puzzles, kids are given a slow introduction on how to use their Rubik's Cube and progress to harder and harder challenges.
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command Rubiks Build It Solve It Review
Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).  

There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.

Rubiks Build It


The quality of the individual parts are also inspected just after exiting the mold. Since thousands of parts are made daily, a complete inspection would be difficult. Consequently, line inspectors may randomly check the plastic parts at fixed time intervals and check to ensure they meet size, shape, and consistency specifications. This sampling method provides a good indication of the quality of the overall Rubik's cube production run. Things that are looked for include deformed parts, improperly fitted parts and inappropriate labeling. While visual inspection is the primary test method employed, more rigorous measurements may also be performed. Measuring equipment is used to check the length, width, and thickness of each part. Typically, devices such as a vernier caliper, a micrometer, or a microscope are used. Just prior to putting a cube in the packaging it may be twisted to ensure that it holds together and is in proper working order. This can be done by hand or by a turning machine. If a toy is found to be defective it is placed aside to be reworked later.
There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.

Rubiks Build It


The arrangement of the cube is an excellent method to improve the cognitive, visual, spatial and motor abilities in kids. The process of arranging the cube will enable children to exploit their spatial and visual skills as they learn to adjust the tiles. It also enables children to identify colors and allow them to create perfect combinations. Check it out here.
Building the Rubik's Cube is pretty easy to do. It took us about 15 minutes, and the instructions were fairly easy to follow. Make sure you pay attention to where you are supposed to place the colored tiles because if you snap them on in the wrong place, you can't remove them. You'll still be able to use your Rubik's Cube, but you won't be able to follow along in the solution guide.
Repeat the process. Turn back to your blue side and repeat the turns on opposite sides. Then, return once more to the red side and turn the opposite sides in opposite directions. And last, return once more to the blue side and turn the opposite sides in opposite directions. When you finish, you should have a staircase-like zig-zag across four sides of your Rubik’s cube.[4]

The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function. Rubix Building Solutions
Even in the manual it states that you will need to practice using trial and error. Personally, we have a feeling that people who like doing puzzles and working things out will enjoy this more. It is important that you have patience when it comes to building the Rubik’s Build It Solve It cube. However, once you get the hang of this you are going to feel pretty smart. And your friends will be really impressed  because it takes a bit of effort to solve one of these cubes. If you would like to read our review on the d-fantix cyclone 3×3 – please click on the link.

Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).  

Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform: Rubiks Build It Solve It Review


Over the next few years, Rubik worked with a manufacturer to allow production of the cube on a mass scale. After three years of development, the first cubes were available on toy store shelves in Budapest. While the cube remained popular in Hungry, the political atmosphere of the time made it difficult for it to be introduced in the United States. The two men who were most responsible for making the cube an international success were Dr. Laczi Tibor and Tom Kremer of Seven Towns Ltd., London. Seven Towns licensed the Rubik Cube invention from Professor Rubik for worldwide distribution. Dr. Tibor worked within Hungry to convince bureaucrats to allow the technology out of the country. Kremer found a United States toy maker, the Ideal Toy company, who was willing to help market the product. The product was an immediate hit, and during the 1980s, over 200 million cubes were sold. Around 1983, the frenzied popularity of the cube began to wane and sales slowed drastically. It remained in small scale production until Seven Towns took over the marketing, and licensed the Rubik Cube to the Oddzon Company for the United States market in 1995. Since that time sales have steadily increased to over 500,000 units a year.
If you're reading this, you're probably holding a cube in your hand and already feeling bad about yourself for needing to look up the solution. But don't worry! In fact, most of the “super-human-intelligence beings” (a common misconception) who have solved the cube thousands of times in their lifetimes were sitting as you are now. Whether you want to learn it to impress a girl, because your friends bet you couldn't, or just to close the book on the biggest time waste of your childhood by finally defeating it, this guide will take you through the simplest way to conquer the puzzle.
Erno Rubik, an architect and professor at the University of Budapest developed the first working prototype of the Rubik's cube in 1974. He received a Hungarian patent in 1975. Apparently, it was also independently designed by Terutoshi Ishige, an engineer from Japan, who received a Japanese patent in 1976. Professor Rubik created the cube as a teaching aid for his students to help them recognize three-dimensional spatial relationships. When he showed the working prototype to his students, it was an immediate hit.

In this step we have four pieces to solve. First choose a color to begin with. I chose white in this guide. For this time, choose the white as well, so the images along the solution will be relevant to your solving process. In addition, it is best to start with the white/yellow colors as they are the easiest colors for quick recognition which is important for speedsolving.


There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.

Rubiks Build It


In this step we have four pieces to solve. First choose a color to begin with. I chose white in this guide. For this time, choose the white as well, so the images along the solution will be relevant to your solving process. In addition, it is best to start with the white/yellow colors as they are the easiest colors for quick recognition which is important for speedsolving.
There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.

Rubik's cube is a toy puzzle designed by Erno Rubik during the mid-1970s. It is a cube-shaped device made up of smaller cube pieces with six faces having differing colors. The primary method of manufacture involves injection molding of the various component pieces, then subsequent assembly, labeling, and packaging. The cube was extremely popular during the 1980s, and at its peak between 1980 and 1983, 200 million cubes were sold world wide. Today sales continue to be over 500,000 cubes sold world wide each year. Rubiks Build It Solve It Review
×