Finally, we add a camera arm.  In the original design by MindCubr, this held the EV3 color sensor over the Rubik’s cube.  In our modified design, it holds a Raspberry Pi Camera over the Rubik’s cube.  We use two LEGO Mindstorms motors to manipulate the cube: the first sits below the cradle to rotate the cube, and the second moves the shuffler arm to spin the cube on an opposite axis.

Puzzle makers have been creating problems for people to solve for centuries. Some of the earliest puzzles date back to the time of the ancient Greeks and Romans. The Chinese have a ring puzzle that is thought to have been developed during the second century A.D. This was first described by Italian mathematician Girolamo Carolano (Cardan) in 1550. When the printing press was invented, complete books of mathematical and mechanical problems designed specifically for recreation were circulated. Rubix Building Products
Headlights are fairly simple to spot. Looking at the image, we can see on the right hand side that the orange edge has a green corner on either side of it. That is a set of headlights. The left hand side has two different colours on either side, so that is not a set of headlights. It is very important to note that a full bar (a blue edge has a blue corner on either side of it, so all three pieces are blue) is also seen as a set of headlights. This is only seen in one case of the 21 though, so you won't see it often. If you have a set of headlights on each side, ignore this part and read the section titled “The U Permutation”. Rubix Builders
Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look at the Rubik’s Build It, Solve It, because we believe this is the one-way ticket to finally solving the cube! Rubix Building Solutions
When you get round to building the Rubik’s Cube, you will find it is not as hard as it appears.  The instructions are quite easy to follow and it will probably take you about fifteen minutes. When you get round to placing the colored tiles, pay attention to where they are supposed to go. Because once you snap them into place. you will not be able to remove them. Having said that. you can still use the Rubik’s Cube. What you will not be able to do is follow the instruction guide and solve the puzzle.
Toys"R"Us will gladly issue a refund when goods are faulty, do not match the description or purpose. To return a promotional goods or an unopened product purchased online, shipping cost incurred will not be refunded. To request a refund, please call our Customer Service team on 852-2287-1888 and have either your order confirmation or packing slip handy. In some situations, such as pre-order or on sale, the products are not available for refund and returns. To know more details, please click here
Just because this kit gives you a behind-the-scenes look as to how a Rubik's Cube is made along with tips for how to solve it doesn't mean that you'll be solving it like a pro within seconds. Even the solution booklet itself says that the first step will take practice and trial by error. So this is definitely going to be more fun for kids or adults who enjoy the puzzlement of a Rubik's Cube and have the patience to build it and practice using the solving tips. But once you finally do solve it, you'll be pretty proud of yourself, and your friends and family will be impressed. Rubix Builders
The quality of the individual parts are also inspected just after exiting the mold. Since thousands of parts are made daily, a complete inspection would be difficult. Consequently, line inspectors may randomly check the plastic parts at fixed time intervals and check to ensure they meet size, shape, and consistency specifications. This sampling method provides a good indication of the quality of the overall Rubik's cube production run. Things that are looked for include deformed parts, improperly fitted parts and inappropriate labeling. While visual inspection is the primary test method employed, more rigorous measurements may also be performed. Measuring equipment is used to check the length, width, and thickness of each part. Typically, devices such as a vernier caliper, a micrometer, or a microscope are used. Just prior to putting a cube in the packaging it may be twisted to ensure that it holds together and is in proper working order. This can be done by hand or by a turning machine. If a toy is found to be defective it is placed aside to be reworked later.
From these early riddles and word problems, toy puzzles were naturally developed. In 1857, the Irish mathematician Sir William Hamilton invented the Icosian puzzle. Sometime around 1870, the famous 15 Puzzle was introduced, reportedly by Sam Lloyd. This puzzle involved numerical tiles that had to be placed in order and became extremely popular in the early twentieth century. In 1883, French mathematician Edouard Lucas created the Tower of Hanoi puzzle. This puzzle was made up of three pegs and a number of discs with different sizes. The goal was to place the discs on the pegs in the correct order.
Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
Even in the book, during the first step, you’re told that you will need to practice and trial by error. Personally, we feel that this cube will be more fun for children and adults that enjoy puzzles and don’t mind the complications behind a Rubik’s Cube. You must have patience when it comes to building and practicing. However, once you are finally able to solve it, you’re going to be pretty proud of yourself and the people around you are going to be impressed because it really takes a lot to solve one of these cubes.

Rubik's cube is a toy puzzle designed by Erno Rubik during the mid-1970s. It is a cube-shaped device made up of smaller cube pieces with six faces having differing colors. The primary method of manufacture involves injection molding of the various component pieces, then subsequent assembly, labeling, and packaging. The cube was extremely popular during the 1980s, and at its peak between 1980 and 1983, 200 million cubes were sold world wide. Today sales continue to be over 500,000 cubes sold world wide each year. Rubiks Build It Solve It Review


1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds.


Even in the book, during the first step, you’re told that you will need to practice and trial by error. Personally, we feel that this cube will be more fun for children and adults that enjoy puzzles and don’t mind the complications behind a Rubik’s Cube. You must have patience when it comes to building and practicing. However, once you are finally able to solve it, you’re going to be pretty proud of yourself and the people around you are going to be impressed because it really takes a lot to solve one of these cubes.
Rubik’s Build It Solve It is very similar to the traditional Rubik’s cube, but with a slight twist.  With this cube you get all of the tools and bit’s and pieces along with the instructions.  This is all you will need in order you you to build a Rubik’s Cube of your own. Once you have fitted the cube together, an instruction booklet has been included, and it is 10-pages in length. Finally, you will learn after all these years the process of solving Rubik’s Cube. You will be shown everything from identifying the parts of the cube along with solving basic puzzles. When you buy this toy, your children will be shown a slow and steady way of using the cube. They will then progress further with the toy to learn even harder challenges.

When you get round to building the Rubik’s Cube, you will find it is not as hard as it appears.  The instructions are quite easy to follow and it will probably take you about fifteen minutes. When you get round to placing the colored tiles, pay attention to where they are supposed to go. Because once you snap them into place. you will not be able to remove them. Having said that. you can still use the Rubik’s Cube. What you will not be able to do is follow the instruction guide and solve the puzzle. Rubiks Build It Solve It
×