There are various puzzles that involve colored square tiles and colored cubes. Some early precursors to the Rubik's cube include devices such as the Katzenjammer and the Mayblox puzzle. The Mayblox puzzle was created by British mathematician Percy MacMahon in the early 1920s. In the 1960s, Parker Bothers introduced another cube puzzle type toy called Instant Insanity. This toy achieved a moderate level of popularity in the United States. The early 1970s brought with it a device called the Pyraminx, which was invented by Uwe Meffert. This toy was a pyramid that had movable pieces that were to be lined up according to color.

1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds.
5 After all the labeling is completed, the cubes are put in their final packaging. This can be a small box that has an instruction booklet included or a plastic blister pack with a cardboard backing. The package serves the dual purpose of protecting the Rubik's cube from damage caused by shipping and advertising the product. The Rubik's cube packages are put into cases and moved to a pallet. The pallets are then loaded on trucks and the products are shipped all over the world.
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'.
1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds. Rubiks Build It Solve It Instructions
3 The Rubik's cube parts are taken to an assembly line. In this phase of production, the individual cube pieces are put together. Starting with the nylon core, each ABS center cube is riveted to the core with a spring spacer. The rivet is carefully controlled with a depth stop to ensure the spring is compressed just the right amount. Each center cube has a plastic cover that is glued on to hide the rivet. One of the six center cubes is left until the last part of the assembly. The ABS edges and corner pieces are individually stacked around the core. The cube is built from the bottom up and the last piece to be assembled is the final center cube which is again riveted into the core with a spring spacer and the final cap is glued on.
Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform: Rubiks Build It Solve It Review
The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function.

For decorative purposes, a colorant is typically added to the plastic. The pieces of a Rubik's cube are typically black. During production, colored stickers are put on the outside of the cube to denote the color of a side. The plastics that are used during production are supplied to the manufacturer in a pellet form complete with the filler and colorants. These pellets can then be loaded into the molding machines directly.
When you get round to building the Rubik’s Cube, you will find it is not as hard as it appears.  The instructions are quite easy to follow and it will probably take you about fifteen minutes. When you get round to placing the colored tiles, pay attention to where they are supposed to go. Because once you snap them into place. you will not be able to remove them. Having said that. you can still use the Rubik’s Cube. What you will not be able to do is follow the instruction guide and solve the puzzle.
Do you remember those complicated little Rubik’s block that we would sit there trying to figure out for what seems like hours? Did any of you guys/girls ever solve them? Maybe all it takes for us to solve the “cube” would be for us to see what it’s all about. While there are many mesmerizing toys that are about to emerge into our world, today, we would like to take a close look in this Rubik’s Build It Solve It Review, because we believe this is the one-way ticket to finally solving the cube! Rubix Build
×