Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform:

This is our review about the Rubik’s Build It Solve It  building kit. Did you ever have one of those Rubik cubes, or do you still have one. Do you remember how complicated they were , you would try for hours and even then you could not work it out. Did any one of you ever solve them, I think I remember someone on utube showing how to do it years later. What if you knew what the Rubik’s Build It, Solve It cube was all about, would that help. Even though there are quite a number of  mesmerizing toys in our world today. It might be quite a revelation to take a closer look  at the Rubik’s Build It Solve It building kit. Because we believe that this game might be the clue to solving it. If you have already decided to buy this, check it out here at amazon.com.


The commercial cube is composed of six fixed cubes, eight movable cubes on the corners and 12 movable cubes on the edges. Each cube is one of six colors. The Rubik's cube has red, yellow, blue, green, white, and orange colors. In its solved state, each color is on only one face. When the cube is rotated, the edges and corners move and the cube becomes scrambled. The challenge of the puzzle is to restore each cube to its original position. The cube is extremely challenging because there are slightly more than 43 quintillion (4.3 × 10 19 ) possible arrangements, and only one solution.
4 Next, the Rubik's cube faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.
When you get round to building the Rubik’s Cube, you will find it is not as hard as it appears.  The instructions are quite easy to follow and it will probably take you about fifteen minutes. When you get round to placing the colored tiles, pay attention to where they are supposed to go. Because once you snap them into place. you will not be able to remove them. Having said that. you can still use the Rubik’s Cube. What you will not be able to do is follow the instruction guide and solve the puzzle. Rubiks Build It Solve It
There are 5 different positions your cube can be in now, one of which could be solved. The rest of them have all four corners solved, so do the required amount of U moves so that every corner is in its right place. 2 of the 4 remaining possibilities have a solved bar (as mentioned above, where all three colours on that side are the same), and the other 2 have no solved bars.
Finally, we add a camera arm.  In the original design by MindCubr, this held the EV3 color sensor over the Rubik’s cube.  In our modified design, it holds a Raspberry Pi Camera over the Rubik’s cube.  We use two LEGO Mindstorms motors to manipulate the cube: the first sits below the cradle to rotate the cube, and the second moves the shuffler arm to spin the cube on an opposite axis.
From these early riddles and word problems, toy puzzles were naturally developed. In 1857, the Irish mathematician Sir William Hamilton invented the Icosian puzzle. Sometime around 1870, the famous 15 Puzzle was introduced, reportedly by Sam Lloyd. This puzzle involved numerical tiles that had to be placed in order and became extremely popular in the early twentieth century. In 1883, French mathematician Edouard Lucas created the Tower of Hanoi puzzle. This puzzle was made up of three pegs and a number of discs with different sizes. The goal was to place the discs on the pegs in the correct order.
Finally, we add a camera arm.  In the original design by MindCubr, this held the EV3 color sensor over the Rubik’s cube.  In our modified design, it holds a Raspberry Pi Camera over the Rubik’s cube.  We use two LEGO Mindstorms motors to manipulate the cube: the first sits below the cradle to rotate the cube, and the second moves the shuffler arm to spin the cube on an opposite axis.
The Rubik’s Build It, Solve It kit is for one player.  Although ages 8 and up are recommended, I believe younger children will enjoy playing with the assembled toy.  As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. The kit gives an inside look on how the cube works and how it is put together. Plus, you will receive some tips in the instruction manual on how to solve it.

Sport, Outdoor & Furniture Kids Furniture Sand Toys, Pools & Inflatables Kids Sports & Balls Trampolines & Playgyms Blasters & Water Pistols Vehicles Hobbies & Radio Controlled Remote Control Collectible Vehicles Slot Cars & accessories Model Trains & accessories Model Kits Vehicles & Play Sets STEM STEM - Science STEM - Technology STEM - Engineering STEM - Mathematics
This Rubik’s Build It, Solve It kit is for one player – it is recommended for ages 8 and up. As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. This kit right here is going to give an inside look on how the cube works and how it’s put together. Plus, you’ll receive some tips in the instruction manual on how to solve it. Rubix Build
×