If you're reading this, you're probably holding a cube in your hand and already feeling bad about yourself for needing to look up the solution. But don't worry! In fact, most of the “super-human-intelligence beings” (a common misconception) who have solved the cube thousands of times in their lifetimes were sitting as you are now. Whether you want to learn it to impress a girl, because your friends bet you couldn't, or just to close the book on the biggest time waste of your childhood by finally defeating it, this guide will take you through the simplest way to conquer the puzzle.
There are 5 different positions your cube can be in now, one of which could be solved. The rest of them have all four corners solved, so do the required amount of U moves so that every corner is in its right place. 2 of the 4 remaining possibilities have a solved bar (as mentioned above, where all three colours on that side are the same), and the other 2 have no solved bars.
Whether you complete all 6 stages or 1, be sure to tell your teacher about this program so all your classmates can solve with you! Teachers from all over the country use our program, at no cost, to teach their classes not only to solve, but math, art, science, and more. Hundreds of schools compete at solving cubes as a group and classes create really cool mosaic designs too. We even have ongoing mosaic contests each year. So check out our site and learn how you can do even more with a Rubik's® Cube!
Finally, we add a camera arm.  In the original design by MindCubr, this held the EV3 color sensor over the Rubik’s cube.  In our modified design, it holds a Raspberry Pi Camera over the Rubik’s cube.  We use two LEGO Mindstorms motors to manipulate the cube: the first sits below the cradle to rotate the cube, and the second moves the shuffler arm to spin the cube on an opposite axis.
You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card.
If you're reading this, you're probably holding a cube in your hand and already feeling bad about yourself for needing to look up the solution. But don't worry! In fact, most of the “super-human-intelligence beings” (a common misconception) who have solved the cube thousands of times in their lifetimes were sitting as you are now. Whether you want to learn it to impress a girl, because your friends bet you couldn't, or just to close the book on the biggest time waste of your childhood by finally defeating it, this guide will take you through the simplest way to conquer the puzzle. 

Keeping white on top, turn the cube so that a different colour face is toward you. Follow the above instructions again. Repeat with the other two faces until the white cross is complete. This step is quite intuitive; you can do it for sure but it does take a little practice. Just move the white edges to their places not messing up the ones already fixed.   Rubiks Build It Solve It Review
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command Rubiks Build It Solve It Review
Rubik’s Build It, Solve It is similar to the conventional Rubik’s block, but with a twist. This block includes each the tools, bits and directions kids need to be able to construct a Rubik’s Cube of the own. After this block was assembled together, there’s an education booklet (it’s’s 10-pages in duration) which will direct you through the procedure for solving the Rubik’s Cube (eventually). Here, you’ll find everything from identifying the areas of the block to solving fundamental puzzles. With this toy, kids will be provided a slow and continuous introduction about the best way best to use the block and progress to harder struggles. Rubix Build
×