Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform:

1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds.
The manufacture of the first Rubik's cube prototypes was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the Rubik's cube, and putting the finished product in packaging.
When you get round to building the Rubik’s Cube, you will find it is not as hard as it appears.  The instructions are quite easy to follow and it will probably take you about fifteen minutes. When you get round to placing the colored tiles, pay attention to where they are supposed to go. Because once you snap them into place. you will not be able to remove them. Having said that. you can still use the Rubik’s Cube. What you will not be able to do is follow the instruction guide and solve the puzzle.
Rubik’s Build It, Solve It is similar to the conventional Rubik’s block, but with a twist. This block includes each the tools, bits and directions kids need to be able to construct a Rubik’s Cube of the own. After this block was assembled together, there’s an education booklet (it’s’s 10-pages in duration) which will direct you through the procedure for solving the Rubik’s Cube (eventually). Here, you’ll find everything from identifying the areas of the block to solving fundamental puzzles. With this toy, kids will be provided a slow and continuous introduction about the best way best to use the block and progress to harder struggles.
Dreamt up by cuber Daniel Stabile who posted a demonstration to YouTube and a how-to to Instructables, the paper cube is fully-functional if not particularly easy to use. On top of that, assembly will likely take you a while, but it will also teach about how the insides of these cubes—speedy and slow alike—actually function mechanically. In a video showing off the creations, Stabile demonstrates his first attempt, as well as a better-looking second version: Rubiks Build It Solve It
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'.

Rubiks Build It Solve It


Here, we're looking at the colours that aren't solved. There are 21 different cases for the top layer, but we only need a couple of algorithms to solve them all. The first thing we want to find is headlights. Only 2 of the cases don't have any headlights (one of them is if you skip this step, and the cube is already solved). For the one case without headlights, just perform the algorithm below from any angle. This is a better case because when you do the next step, the cube will be solved already. Rubix Builders
×