5 After all the labeling is completed, the cubes are put in their final packaging. This can be a small box that has an instruction booklet included or a plastic blister pack with a cardboard backing. The package serves the dual purpose of protecting the Rubik's cube from damage caused by shipping and advertising the product. The Rubik's cube packages are put into cases and moved to a pallet. The pallets are then loaded on trucks and the products are shipped all over the world. Rubiks Build It Solve It Review

There are 5 different positions your cube can be in now, one of which could be solved. The rest of them have all four corners solved, so do the required amount of U moves so that every corner is in its right place. 2 of the 4 remaining possibilities have a solved bar (as mentioned above, where all three colours on that side are the same), and the other 2 have no solved bars.


Puzzle makers have been creating problems for people to solve for centuries. Some of the earliest puzzles date back to the time of the ancient Greeks and Romans. The Chinese have a ring puzzle that is thought to have been developed during the second century A.D. This was first described by Italian mathematician Girolamo Carolano (Cardan) in 1550. When the printing press was invented, complete books of mathematical and mechanical problems designed specifically for recreation were circulated. Rubix Building Products
Keeping white on top, turn the cube so that a different colour face is toward you. Follow the above instructions again. Repeat with the other two faces until the white cross is complete. This step is quite intuitive; you can do it for sure but it does take a little practice. Just move the white edges to their places not messing up the ones already fixed.  
Even in the manual it states that you will need to practice using trial and error. Personally, we have a feeling that people who like doing puzzles and working things out will enjoy this more. It is important that you have patience when it comes to building the Rubik’s Build It Solve It cube. However, once you get the hang of this you are going to feel pretty smart. And your friends will be really impressed  because it takes a bit of effort to solve one of these cubes. If you would like to read our review on the d-fantix cyclone 3×3 – please click on the link.
Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command

We add the BrickPi3 to the LEGO assembly.  We used the LEGO EV3 “wings” to support the BrickPi3 and make it level with the BricKuber body.  This is a good step to add 8XAA batteries to the power pack and attach the BrickPi3 power pack to the LEGO assembly.  For programming you can power the BrickPi3 via USB power to the Raspberry Pi, however to move the motors you will need to supply power with the Power Pack.        
You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card. Rubix Builders
Important! The center pieces are part of the core and subsequently cannot move relatively to each other. For that reason they are already "solved". The solving process is actually bringing all corner and edge pieces to the "already solved" center pieces (meaning there are only 20 pieces to solve out of the 26). For example, the blue center piece will always be opposite to the green center piece (on a standard color-scheme cube). It doesn't matter how hard you will try scrambling the cube, it will just stay that way.
When you eventually get the desired position, there are two slightly different variations of it. For this, we need to look at the front of the cube. The yellow corner facing the front can be  in two positions: Either facing the front, or facing the right. In the first image, it is facing the front. This shows you have Sune. To solve it, just do the above algorithm one more time, and you should have oriented all of the top layer.
This Rubik’s Build It, Solve It kit is for one player – it is recommended for ages 8 and up. As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. This kit right here is going to give an inside look on how the cube works and how it’s put together. Plus, you’ll receive some tips in the instruction manual on how to solve it. Rubix Build
×