You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card. Rubix Builders

Your goal is to have all four edges matching their centres. If you have this, then the cross is solved. If you have only two, then you could have one of two cases. Either the two matching edges are adjacent (next to each other) or opposite each other. If they are adjacent, hold the cube so that the two solved pieces are facing the front and left of the cube (shown in the left picture), then perform: Rubiks Build It Solve It
The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function. Rubiks Build It Solve It
The Rubik's cube appears to be made up of 26 smaller cubes. In its solved state, it has six faces, each made up of nine small square faces of the same color. While it appears that all of the small faces can be moved, only the corners and edges can actually move. The center cubes are each fixed and only rotate in place. When the cube is taken apart it can be seen that the center cubes are each connected by axles to an inner core. The corners and edges are not fixed to anything. This allows them to move around the center cubes. The cube maintains its shape because the corners and edges hold each other in place and are retained by the center cubes. Each piece has an internal tab that is retained by the center cubes and trapped by the surrounding pieces. These tabs are shaped to fit along a curved track that is created by the backs of the other pieces. The central cubes are fixed with a spring and rivet and retain all the surrounding pieces. The spring exerts just the right pressure to hold all the pieces in place while giving enough flexibility for a smooth and forgiving function.
1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds. Rubiks Build It Solve It Instructions
If it comes to constructing the Rubik’s Cube, it’s not as difficult as it seems. In reality, it is going to take approximately fifteen minutes and the directions are simple to follow. If it comes to putting the coloured tiles, be sure to look closely at where you’re supposed to put them since in the event that you snap them in the incorrect location, you won’t have the ability to eliminate them. Yes, you will continue to have the ability to use this Rubik’s Cube, however you won’t be able to follow along with the documentation manual on solving the mystery.
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'.
Simply put the 1x1x3 is a pseudo puzzle, It fills a gap in the collection but its not exactly complicated to solve. The way this puzzle was made was by using two centres and a core of a QiYi Sail. As these parts already spin like a 1x1x3 should all I had to do was make these parts into cubies by adding some apoxie sculpt and sanding them smooth. This puzzle was made in an afternoon and stickered the following morning while I was also building my 'Mefferts bandage cube'.
This Rubik’s Build It Solve It building kit is just for one player, and is one of the new toys for 2017. Winning Moves recommend that it will suit children of ages 8 and up. We have mentioned before, that this building kit is ideal for children and adults who like to figure things out. Anyone who likes to put puzzles together will love this. The Rubik’s Build It Solve It building kit will give you an inside look on how the cube works. You will also see how it is put together, and get some tips from the instruction manual on how you can solve it. Rubix Builders

If you were around in the 1980’s and did not live under a rock, you had a Rubik’s cube.  It was the 3D combination puzzle that had children and adults mesmerized trying to solve the impossible puzzle.  We would spend hours twisting and turning the cube to figure the solution. The cube was invented by an Hungarian professor of architecture, Erno Rubik, in 1974.  Although it took Erno over one month to solve his very own puzzle, it  became a fad and everyone had one. Consequently, it became the world’s best selling toy ever at that time.
Building the Rubik's Cube is pretty easy to do. It took us about 15 minutes, and the instructions were fairly easy to follow. Make sure you pay attention to where you are supposed to place the colored tiles because if you snap them on in the wrong place, you can't remove them. You'll still be able to use your Rubik's Cube, but you won't be able to follow along in the solution guide.
Puzzle makers have been creating problems for people to solve for centuries. Some of the earliest puzzles date back to the time of the ancient Greeks and Romans. The Chinese have a ring puzzle that is thought to have been developed during the second century A.D. This was first described by Italian mathematician Girolamo Carolano (Cardan) in 1550. When the printing press was invented, complete books of mathematical and mechanical problems designed specifically for recreation were circulated. Rubiks Build It Solve It

Using the LEGO Camera support, attach the camera.  The small black lens of the camera should fit between the two LEGO beam supports.  Secure the camera in place to the LEGO supports with some electrical tape.  This is a good time to make sure that the camera is position to be able to capture the entire Rubik’s cube.  You can take a test picture with the raspistill command


If it comes to constructing the Rubik’s Cube, it’s not as difficult as it seems. In reality, it is going to take approximately fifteen minutes and the directions are simple to follow. If it comes to putting the coloured tiles, be sure to look closely at where you’re supposed to put them since in the event that you snap them in the incorrect location, you won’t have the ability to eliminate them. Yes, you will continue to have the ability to use this Rubik’s Cube, however you won’t be able to follow along with the documentation manual on solving the mystery.
1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds. Rubiks Build It Solve It Instructions
The manufacture of the first Rubik's cube prototypes was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the Rubik's cube, and putting the finished product in packaging.

Alright, let us be clear here. Do you remember how aggravated you used to get when trying to do the traditional Rubik’s Cube. Did you ever try to solve it, remember how frustrating it could be. Well, let me tell you that the Rubik’s Build It Solve building kit offers you a behind-the-scenes look. Winning Moves even give you a 10-page instruction manual. But this does not mean you could be solving the puzzle within seconds like a professional.


1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds. Rubix Building Products
The project uses the Pi to directly solve the Rubik’s cube. The BrickPi3 takes the unsolved Rubik’s cube and the Raspberry Pi takes a picture of each side of the Rubik’s cube with the Raspberry Pi Camera. The Pi creates a text map of the color squares that shows where they are located on the cube. When it has fully mapped the cube, the Pi uses the “kociemba” python library to map out the moves needed to solve the Rubik’s cube. This information is taken by the Pi and BrickPi3 to solve the Rubik’s cube using the LEGO motors. The result: a solved Rubik’s cube. Rubix Building Solutions
You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card.
This Rubik’s Build It, Solve It kit is for one player – it is recommended for ages 8 and up. As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. This kit right here is going to give an inside look on how the cube works and how it’s put together. Plus, you’ll receive some tips in the instruction manual on how to solve it. Rubix Build
×