This Rubik’s Build It, Solve It kit is for one player – it is recommended for ages 8 and up. As we said before, it is great for children and adults that don’t mind trying to figure out how the cube works – it’s great for those that enjoy putting puzzles together. This kit right here is going to give an inside look on how the cube works and how it’s put together. Plus, you’ll receive some tips in the instruction manual on how to solve it.
Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).  

3 The Rubik's cube parts are taken to an assembly line. In this phase of production, the individual cube pieces are put together. Starting with the nylon core, each ABS center cube is riveted to the core with a spring spacer. The rivet is carefully controlled with a depth stop to ensure the spring is compressed just the right amount. Each center cube has a plastic cover that is glued on to hide the rivet. One of the six center cubes is left until the last part of the assembly. The ABS edges and corner pieces are individually stacked around the core. The cube is built from the bottom up and the last piece to be assembled is the final center cube which is again riveted into the core with a spring spacer and the final cap is glued on.
2 After the cube parts are ejected from the mold, they are dropped into container bins and hand inspected to ensure that no significantly damaged parts are used. The waste sprue material is set aside to be reused or scrapped. Waste material can be ground up and melted again to make new parts, however reground material can degrade and cause poor quality parts. Rubik's cubes are always made from virgin material and never use reground waste plastic.
Since the center pieces cannot be moved relatively to each other it's important to solve the edge pieces correctly in relation to each other. For example, when solving the white in our case- the green center piece is to the left of the red center piece, therefore the green-white edge piece should to be solved to the left of the red-white edge piece (see image).  

Rubik’s Build It Solve It is very similar to the traditional Rubik’s cube, but with a slight twist.  With this cube you get all of the tools and bit’s and pieces along with the instructions.  This is all you will need in order you you to build a Rubik’s Cube of your own. Once you have fitted the cube together, an instruction booklet has been included, and it is 10-pages in length. Finally, you will learn after all these years the process of solving Rubik’s Cube. You will be shown everything from identifying the parts of the cube along with solving basic puzzles. When you buy this toy, your children will be shown a slow and steady way of using the cube. They will then progress further with the toy to learn even harder challenges.
Now you need to orient these pieces. Refer to the next picture. As you can see, the orange piece matches the orange centre. Look at the edges on your puzzle. You could have none matching, two matching or all matching. If you have all four edges matching the centres, your cross is solved. If you have none matching, perform a U move, then look around the cube again. You want to have at least two matching. If none of them match, do another U move. Repeat until you have either two or four edges matching their centres.

Just because this kit gives you a behind-the-scenes look as to how a Rubik's Cube is made along with tips for how to solve it doesn't mean that you'll be solving it like a pro within seconds. Even the solution booklet itself says that the first step will take practice and trial by error. So this is definitely going to be more fun for kids or adults who enjoy the puzzlement of a Rubik's Cube and have the patience to build it and practice using the solving tips. But once you finally do solve it, you'll be pretty proud of yourself, and your friends and family will be impressed. Rubix Builders

The Rubik's cube (sometimes misspelled rubix cube) is a mechanical 3D puzzle, invented more than 30 years ago and still considered as the best-selling toy of all times! Yet, solving the Rubik's Cube is considered a nearly-impossible task, which requires an IQ of 160... Is that really so hard? Definitely not!! Just follow this simple step by step solving guide and you'll shortly find out that you can solve the Rubik's cube as well… Let's get to work!
1 When production is initiated, the plastic pellets are transformed into Rubik's cube parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Rubik's cube part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Rubik's cube cycle time is around 20 seconds. Rubiks Build It Solve It Instructions
Building the Rubik's Cube is pretty easy to do. It took us about 15 minutes, and the instructions were fairly easy to follow. Make sure you pay attention to where you are supposed to place the colored tiles because if you snap them on in the wrong place, you can't remove them. You'll still be able to use your Rubik's Cube, but you won't be able to follow along in the solution guide.
You can find assembly instructions for the BrickPi3 here. We will need to assemble the case, attach the BrickPi3, the Raspberry Pi, the Raspberry Pi Camera, add an SD Card, and add batteries.  To make the software easier to setup, Raspbian for Robots comes with most of the software you will need already setup.  You will need at least an 8 GB SD Card, and you will want to expand the disk to fit the full size of the SD Card. Rubix Builders
×